20mm Plastic Pipe Tray – 10sqm

Designed to hold 15 or 16mm pipe and made from 100% recycled high impact polymer, the underfloor heating pipe tray provides a robust alternative to pipe staples or clip rails for in-screed underfloor heating systems.

The interlocking panel can also be laid directly onto Kingspan or Cellotex insulation to further increase the performance of the system.  When the pipe is correctly in place it sits slightly raised off the floor. This allows screed to cover the entire pipe and eliminates any contact with the insulation boards to create more heat output into the screed for a faster warm up time.

Each channel is set 50mm apart making it easy to work out your pipe centres. Each panel covers 1sqm making it easy to calculate how many you need and reduce unnecessary wastage.

• Dimensions 1280mm x 820mm (1sqm or 0.96sqm interlocked)
• Depth: 20mm low profile
• Pipe centres: 50mm
• Pack coverage: 10sqm

Important: the panels must be bonded to the insulation board using contact adhesive or screwed to ensure the panels do not lift when screed is poured over!